Bib Clipz 

Adhesive race bib buttons.

*No more rusty stain

*No more damage on tee

*Easy to use

Slim, lightweight, clip on strobe light. Safety light for running, cycling, walking and much more!

Specifications

• Battery: 2x CR2032
• Light sources: LED
• Number of LED: 5pcs
• Light sources characteristics: Fixed light sources
• Operating modes: 3 (Steady lucent, Fast flashing, Flashing)
• Materials: Plastic, Electrical components
• Protection glass: IP54
• Operating time: Up to 4000min

Instruction

1. Press front button to select mode.
2. Each light requires 2x CR2032 batteries to run (batteries included).
3. To change the battery, remove the screw on the back using the mini screwdriver. Gently slide the lens upwards slightly and then lift out to open.

Note: Ensure the batteries are placed correctly, following the (+ -) diagram inside the unit. One battery is facing up while the other is facing down.

Slim, lightweight, clip on strobe light. Safety light for running, cycling, walking and much more!

Specifications

• Battery: 2x CR2032
• Light sources: LED
• Number of LED: 5pcs
• Light sources characteristics: Fixed light sources
• Operating modes: 3 (Steady lucent, Fast flashing, Flashing)
• Materials: Plastic, Electrical components
• Protection glass: IP54
• Operating time: Up to 4000min

Instruction

1. Press front button to select mode.
2. Each light requires 2x CR2032 batteries to run (batteries included).
3. To change the battery, remove the screw on the back using the mini screwdriver. Gently slide the lens upwards slightly and then lift out to open.

Note: Ensure the batteries are placed correctly, following the (+ -) diagram inside the unit. One battery is facing up while the other is facing down.

Slim, lightweight, clip on strobe light. Safety light for running, cycling, walking and much more!

Specifications

• Battery: 2x CR2032
• Light sources: LED
• Number of LED: 5pcs
• Light sources characteristics: Fixed light sources
• Operating modes: 3 (Steady lucent, Fast flashing, Flashing)
• Materials: Plastic, Electrical components
• Protection glass: IP54
• Operating time: Up to 4000min

Instruction

1. Press front button to select mode.
2. Each light requires 2x CR2032 batteries to run (batteries included).
3. To change the battery, remove the screw on the back using the mini screwdriver. Gently slide the lens upwards slightly and then lift out to open.

Note: Ensure the batteries are placed correctly, following the (+ -) diagram inside the unit. One battery is facing up while the other is facing down.

Slim, lightweight, clip on strobe light. Safety light for running, cycling, walking and much more!

Specifications

• Battery: 2x CR2032
• Light sources: LED
• Number of LED: 5pcs
• Light sources characteristics: Fixed light sources
• Operating modes: 3 (Steady lucent, Fast flashing, Flashing)
• Materials: Plastic, Electrical components
• Protection glass: IP54
• Operating time: Up to 4000min

Instruction

1. Press front button to select mode.
2. Each light requires 2x CR2032 batteries to run (batteries included).
3. To change the battery, remove the screw on the back using the mini screwdriver. Gently slide the lens upwards slightly and then lift out to open.

Note: Ensure the batteries are placed correctly, following the (+ -) diagram inside the unit. One battery is facing up while the other is facing down.

Slim, lightweight, clip on strobe light. Safety light for running, cycling, walking and much more!

Specifications

• Battery: 2x CR2032
• Light sources: LED
• Number of LED: 5pcs
• Light sources characteristics: Fixed light sources
• Operating modes: 3 (Steady lucent, Fast flashing, Flashing)
• Materials: Plastic, Electrical components
• Protection glass: IP54
• Operating time: Up to 4000min

Instruction

1. Press front button to select mode.
2. Each light requires 2x CR2032 batteries to run (batteries included).
3. To change the battery, remove the screw on the back using the mini screwdriver. Gently slide the lens upwards slightly and then lift out to open.

Note: Ensure the batteries are placed correctly, following the (+ -) diagram inside the unit. One battery is facing up while the other is facing down.