Product Description

The first ever headlamp designed specifically for runners, Nebula Fire is packed with features that will make your night runs safer. This lightweight, multi-beam, rechargeable headlamp comes in three exciting colors, and offers over 192 lumens of clean, eye-pleasing light. A powerful, customized LED disperses the perfect Run-Right Light for runners, blanketing both distance and proximity, creating a less tenuous night running surface. There are five lighting modes – low, medium, high, sprint, & strobe – with a maximum burn time of 25 hours. 

Change light settings touch-free with Nebula Fire's RunWave technology – no more fumbling for buttons!  The Nebula Fire also communicates your presence to drivers via AutoStrobe, as the on-device sensor reacts to cars' headlights and triggers the safety strobe mode. The breathable mesh strap fits comfortably on your head, while the adjustability of the headlamp allows you to easily find the perfect light angle for the trail or road. 

Specs

• LED: 1 LED, 192+ max lumens
• Battery: 1500 mAh Rechargeable Lithium-Ion Polymer battery
• Charge Time: 5 hours
• Minimum USB Charger Amperage: 0.5A
• Water Resistance: IPX4 – Weather resistant
• Adjustable headlamp angle

Settings

• Setting 1 (one blink) – Manual Control: Press the power button to cycle through the various lighting modes. 
  • Regulated Output – Strong light for periods of around 2 hours.
• Setting 2 (two blinks) - RunWave: Cycle through various lighting modes by swiping your hand in front of the sensor with RunWave.
  • Unregulated Output – Stretch lighting performance over long periods as light output starts at 100% and slowly decreases
• Setting 3 (three blinks) - RunWave + AutoStrobe: Communicate your position to drivers with AutoStrobe, and cycle through modes touch-free with RunWave
  • Unregulated Output – Stretch lighting performance over long periods as light output starts at 100% and slowly decreases

Lighting Modes & Burn Time

• Low – 16 Lu, 12m, 25 hrs burn time
• Medium – 80 Lu, 25m, 6.5 hrs burn time
• High – 160 Lu, 31m, 4.25 hrs burn time
• Sprint – 192 Lu, 41 m (Sprint mode availability resets after 3 minutes of running time)
• Strobe – 80 Lu

Usage Instructions:

• Press and hold the power button for three seconds to turn on and off
• The headlamp will blink one, two, or three times to tell you what mode is being used (1, 2, or 3)
• Press the setting button to change to a different setting

To Recharge

• Charge fully before first use
• Plug supplied USB cord in to a USB power source (allows charging from 110-220V wall outlet or car cigarette lighter outlet), then plug gently into the cover charge port on the device
• A red LED will light up to indicate charging is occurring, and a green light indicates the Nebula Fire is fully charged
• Recharge time is 5 hours for a fully depleted battery
• When fully charged, unplug Nebula Fire from USB power supply, return port cover gasket to original position and store charger cord until next use

Product Description

Hit the night trails confidently whether on foot or bike with the Nebula Fire with Crossover Kit, the first running-specific headlamp to come with a bike handlebar mount and clip mount, for added versatility. This lightweight, multi-beam, rechargeable headlamp offers over 192 lumens of clean, eye-pleasing light, and can be easily mounted on a bike handlebar or clipped to shirt, jacket, or hydration vest. A powerful, customized LED disperses the perfect Run-Right Light for runners, creating a less tenuous night running surface. There are five lighting modes – low, medium, high, sprint, & strobe – with a maximum burn time of 25 hours. 

Change light settings touch-free with Nebula Fire's RunWave technology – no more fumbling for buttons!  The Nebula Fire also communicates your presence to drivers via AutoStrobe, as the on-device sensor reacts to cars' headlights and triggers the safety strobe mode. The breathable mesh strap fits comfortably on your head, while the adjustability of the headlamp allows you to easily find the perfect light angle for the trail or road. 

Specs

• LED: 1 LED, 192+ max lumens
• Battery: 1500 mAh Rechargeable Lithium-Ion Polymer battery
• Charge Time: 5 hours
• Minimum USB Charger Amperage: 0.5A
• Water Resistance: IPX4 – Weather resistant
• Adjustable headlamp angle

Settings

• Setting 1 (one blink) – Manual Control: Press the power button to cycle through the various lighting modes. 
  • Regulated Output – Strong light for periods of around 2 hours.
• Setting 2 (two blinks) - RunWave: Cycle through various lighting modes by swiping your hand in front of the sensor with RunWave.
  • Unregulated Output – Stretch lighting performance over long periods as light output starts at 100% and slowly decreases
• Setting 3 (three blinks) - RunWave + AutoStrobe: Communicate your position to drivers with AutoStrobe, and cycle through modes touch-free with RunWave
  • Unregulated Output – Stretch lighting performance over long periods as light output starts at 100% and slowly decreases

Lighting Modes & Burn Time

• Low – 16 Lu, 12m, 25 hrs burn time
• Medium – 80 Lu, 25m, 6.5 hrs burn time
• High – 160 Lu, 31m, 4.25 hrs burn time
• Sprint – 192 Lu, 41 m (Sprint mode availability resets after 3 minutes of running time)
• Strobe – 80 Lu

Usage Instructions

• Press and hold the power button for three seconds to turn on and off
• The headlamp will blink one, two, or three times to tell you what mode is being used (1, 2, or 3)
• Press the setting button to change to a different setting

To Recharge

• Charge fully before first use
• Plug supplied USB cord in to a USB power source (allows charging from 110-220V wall outlet or car cigarette lighter outlet), then plug gently into the cover charge port on the device
• A red LED will light up to indicate charging is occurring, and a green light indicates the Nebula Fire is fully charged
• Recharge time is 5 hours for a fully depleted battery
• When fully charged, unplug Nebula Fire from USB power supply, return port cover gasket to original position and store charger cord until next use

Product Description

This flashlight, designed for runners, features an integrated 24-degree downward projection angle to focus light on the path ahead of you during the run – no need to twist your wrist! A rear-facing red LED gives you visibility from the back (great out on the roads). Maybe best of all? The Zephyr Fire comes equipped with a comfy and adjustable hand strap that allows for a totally grip-free and effortless carry in either hand. It even has a conveniently placed emergency siren built into the grip, right at your fingertips!

Usage Instructions:

• To turn on, press and hold power button that is integrated in to the hand grip for 2-3 seconds.
• Use power button again to cycle through different light modes as needed.
• To turn off, press and hold power button for 2-3 seconds.

To Recharge: 

• Plug supplied USB cord in to a USB power source (500mA minimum) and then plug gently in to the covered charge port at the top of the unit. A red LED will light up to indicate charging is occuring and a green light indicates the Zephyr Fire is fully charged.
• Charge time is 6 hours for a fully depleted battery. 
• When fully charged, unplug Zephyr Fire from USB power supply, return port cover gasket to original position and store charger cord until next use.

Specs

• LED : 2 LEDs – Front: Cree White LED – 108 Lumens / Back : Red LED - 8 Lumens
• Beam Distance: 67 meters / 220 feet
• Battery : 3.7V Li-Ion Rechargeable via Micro B USB port
• Burn Time : Hi - 5+ hours, Low - 8 hours, Low/Strobe - 15 hours
• Charge Time: 6 hours
• Minimum USB Charger Amperage: 500mA
• Water Resistance : IPX4 – Weather resistant

This flashlight, designed for runners, features an integrated 24-degree downward projection angle to focus light on the path ahead of you during the run – no need to twist your wrist! A rear-facing red LED gives you visibility from the back (great out on the roads). Maybe best of all? The Zephyr Fire comes equipped with a comfy and adjustable hand strap that allows for a totally grip-free and effortless carry in either hand. It even has a conveniently placed emergency siren built into the grip, right at your fingertips!

Usage Instructions:

• To turn on, press and hold power button that is integrated in to the hand grip for 2-3 seconds.
• Use power button again to cycle through 4 different light modes as needed.
• To turn off, press and hold power button for 2-3 seconds.

To Recharge: 

• Plug supplied USB cord in to a USB power source (500mA minimum) and then plug gently in to the covered charge port at the top of the unit. A red LED will light up to indicate charging is occuring and a green light indicates the Zephyr Fire is fully charged.
• Charge time is 5 hours for a fully depleted battery. 
• When fully charged, unplug Zephyr Fire from USB power supply, return port cover gasket to original position and store charger cord until next use.

• LED: 2 LEDs – Front: Cree White LED – 308 lumens / Back : Red LED 8 lumens
• Beam Distance: 104 meters / 341 feet
• Battery: 3.7V Li-Ion Rechargeable via Micro B USB port
• Burn Time: Hi - 3 hours, Low - 6 hours, Low / Strobe - 12 hours
• Charge Time: 5 hours
• Minimum USB Charger Amperage: 500mA
• Water Resistance: IPX4 – Weather resistant

• Rechargeable flashlight designed for runners
• 359 lumens with 4 lighting modes 
• Integrated handstrap for grip-free running
• Engineered 24-downward beam angle 
• Built-in warning siren in grip
• IPX4 weather-resistant for use in any weather

Compact headlamp for proximity lighting and some movement. 200 lumens

Compact headlamp for proximity lighting and some movement. 200 lumens

Compact headlamp for proximity lighting and some movement. 200 lumens

Compact headlamp for proximity lighting and some movement. 200 lumens

Simple, compact headlamp for proximity lighting 150 lumens

Simple, compact headlamp for proximity lighting 150 lumens

Simple, compact headlamp for proximity lighting 150 lumens

Simple, compact headlamp for proximity lighting 150 lumens